Велосипед GT Fury (Spec A) 2009
Поделиться:
- Спецификация
- Отзывы 0
- Катальцы 6
- Из этой серии 6
- Зажим сиденья
- Alloy forged
- Сиденье
- WTB Rocket V Pro, with Cr-mo Rails
- Основа сиденья
- Thompson zero offset, CNC turned USA made 2014 seatpost, 31.6mm by 350
- Ножка
- FUNN RSX Direct mount for Boxxer, full CNC 30 degree rise, for 31.8 bar bore
- Рукоятки
- GT alloy Lock Down
- Рулевая колонка
- FSA Orbit Z 1.5 R cold forged alloy cups for 1.5 headtube with sealed cartdride ACB bearings, with internal reducers for 1 1/8 steerer, 9mm total stack
- Руль
- FSA Carbon DH. 31.8mm bar bore, 25 mm rise with 8 degrre sweep 3 degree tip
- Тормозные ручки
- Avid Code,
- Передний Тормоза
- Avid Code, 203 mm rotor
- Задний Тормоза
- Avid Code, 160 mm rotor
- Ниппель
- DT brass
- Передняя втулка
- DT / Swiss FW 440 for 20 mm Axle
- Задняя втулка
- DT / Swiss FW 440 for 12 mm Axle
- Спицы
- DT 2.0 stainless
- Диски
- Mavic EX-729, welded joint with Maxtal alloy material
- Покрышки
- Kenda Nevegal, 2.5" DH with "Stik-E" compound, butyl cap and sidewall reinforcement
- Цепь
- Mavic EX-729, welded joint with Maxtal alloy material
- Манетки
- Shimano Dura Ace nine speed 12 - 25
- Задние звезды
- FOX DHX AIR 5.0, Air sprung damper with rebound and compression adjust and platform adjust
- Рама
- Full Monocoque Carbon Fiber with forged and CNC fitments, with all new I link assembly and pivot design for 8.65 inches of rear wheel travel with Maxle rear axle QR system
- Передний переключатель
- Shimano New Saint short cage
- Задний переключатель
- Shimano New Saint 9 speed
- Вилка
- Rock Shox Boxxer World Cup, 203 mm travel, Air sprung, with preload, rebound and compression damping, with Motion Control and Maxle 20mm frnt axle
- Нижний кронштейн
- Shimano New Saint with 38 tooth ring
- Педали
- Shimano New Saint
- Шатуны / Звездочка
- E-Thirteen SRS Light guide with chain taco for 38 tooth ring.