Велосипед Specialized Fuse II 2004

FRAME:

Cr-Mo main tube(TT/DT/ST), internally relieved No Oval head tube, weld-on rotor plate, dual lower brake cable routing w/ amplifier, 6mm drop-outs for 14mm axle

FORK:

Hi-Ten, reinforced steerer w/ internal thread for alloy compression bolt, 1-1/4" blades, 6mm drop-outs for 14mm axle

HEADSET:

Dozer 1 1/8" threadless, sealed loose ball bearing

ROTOR:

SST Oryg w/ dual cable amplifier

STEM:

Forged alloy, 55mm reach, top-load

HANDLEBARS:

Hi-Ten 2 piece, 195mm rise x 620 width, 10 deg. backsweep, 4 deg. upsweep

TAPE / GRIPS:

Specialized no-flange Kraton, 130mm

BRAKE:

Rear only: Tektro "U-Brake", coil spring, dual quick release arms

BRAKE LEVER:

Tektro "U-Brake" alloy, two finger

FREEWHEEL:

ACS Main Drive, 1/2x1/8x16t

CHAIN:

KMC Z-510

CRANKSET:

Specialized 3-piece, forged & heat-treated Cr-Mo, 175mm

CHAINRING:

CNC cut 5mm thick 6061-T6, 1/2" x 1/8"x 44t

BOTTOM BRACKET:

Heat treated Cr-Mo 8 spline 19mm spindle, sealed loose ball bearings

PEDALS:

Alloy platform, 9/16" spindle Cr-Mo spindle, molded pins

RIMS:

Sun ZX-25, 20", ground sidewalls

FRONT HUB:

36 hole, alloy shell, mid flange, solid 14mm Cr-Mo axle, double sealed loose ball

REAR HUB:

36 hole, "Flip-Side Freewheel" L&R side f/w threads, alloy shell, mid flange, solid 14mm Cr-Mo axle, double sealed loose ball

SPOKES:

2.0mm (14g) UCP, brass nipples, L187/R187mm front, L185/R185mm rear

FRONT TIRE:

Specialized "Compound" Sport, 30tpi, 20x2.0"

REAR TIRE:

Specialized "Compound" Sport, 30tpi, 20x2.0"

TUBES:

20x 2.0" schraeder valve

SADDLE:

Specialized Jumping with 8mm rails and X-Brace

SEAT POST:

Alloy micro adjust, 30.9mm/300mm for 8mm rails

SEAT BINDER:

Forged alloy single bolt design 33.3 x 31.3mm

NOTES:

2 x axle peg, 38mm OD chain tensioners, chainguard cover, reflectors, owners manual