Велосипед Specialized Fuse I 2004

FRAME:

Cr-Mo seat tube, internally relieved No Oval head tube, weld-on rotor plate, dual lower brake cable routing w/ amplifier, 6mm drop-outs for 14mm axle

FORK:

Hi-Ten, reinforced steerer, 1-1/4" blades w/ cable guide, 6mm drop-outs for 14mm axle

HEADSET:

1 1/8" threadless, sealed loose ball bearing

ROTOR:

SST Oryg w/ dual cable amplifier

STEM:

Forged alloy, 45mm reach, top-load

HANDLEBARS:

Hit-Ten 2 piece, 195mm rise x 620mm width, 10 deg. backsweep, 4 deg. upsweep

TAPE / GRIPS:

Specialized no-flange Kraton, 130mm

BRAKES:

Front: Tektro side pull single pivot caliper Rear: Tektro U-Brake, coil spring, dual quick release arms

BRAKE LEVERS:

Tektro "U-Brake" alloy, two finger

FREEWHEEL:

ACS Main Drive 1/2" x 1/8" x 16t

CHAIN:

KMC Z-510

CRANKSET:

Heat treated Hi-Ten 1-piece, 175mm

CHAINRING:

CNC cut 5mm thick 6061-T6, 1/2" x 1/8"x 42t

BOTTOM BRACKET:

Ball-retainer bearing

PEDALS:

Alloy platform, 1/2" Cr-Mo spindle, molded traction pins

RIMS:

Sun ZX-25, 36h, 20 x 1.75", single wall w/ ground sidewalls

FRONT HUB:

36 hole, alloy shell, solid 14mm Cr-Mo axle, sealed loose ball

REAR HUB:

36 hole, alloy shell, solid 14mm Cr-Mo axle, sealed loose ball

SPOKES:

2.0mm (14g) UCP, brass nipples, L187/R187mm front, L185/R185mm rear

FRONT TIRE:

Specialized "Compound" Sport, 30tpi, 20x2.0"

REAR TIRE:

Specialized "Compound" Sport, 30tpi, 20x2.0"

TUBES:

20x 2.0" schraeder valve

SADDLE:

Specialized Jumping with 7mm rails

SEAT POST:

Alloy micro adjust, 30.9mm/300mm for 7mm rails

SEAT BINDER:

Forged alloy single bolt design 33.3 x 31.3mm

NOTES:

2 x axle peg, chainguard cover, reflectors, owners manual